제품명 : KMO-1L, Omnidirectional planetary ball mill, 무지향성 유성형볼밀
Feature
360 degree whole direction planetary ball mill is a necessary device for mixing, fine grinding, small samples prepared,dispersion of nanomaterials, R&D of new product and small batch production of high-tech materials. The equipment with small volume, comprehensive function, high efficiency and low noise which is an ideal equipment for obtaining micro-particle research samples (four samples at the same time in each experiment) for research and development institute,colleges and universities, enterprise laboratories.The samples can be ground in a vacuum state with the vacuum ball mill tank.It is widely used in geology,mineral,metallurgy,electronic,building material,ceramic,chemical,light industry,medicine,beauty,environment production,tea and so on.You could set the revolution speed and alternative running time of forward and reversal rotation and total grinding time according to the processing requirement.
Working Principl
360 degree whole direction planetary ball mill is a necessary device for mixing, fine
grinding, small samples prepared,dispersion of nanomaterials, R&D of new product and small
batch production of high-tech materials. The product has small volume, comprehensive
function, high efficiency and low noise. It is an ideal equipment for obtaining micro-particle
research samples (four samples at the same time in each experiment) for research and
development institute,colleges and universities, enterprise laboratories.The samples can be
ground in a vacuum state with the vacuum ball mill jars
Planetary Ball Mill has four ball grinding tanks installed on one turntable.when the ball mill jars
is revolution with turntable and it also rotation with self axis,which called planetary operation. The balls and samples inside the jars are impacted strongly in high speed movement, and
samples are eventually ground into powder. Various kinds of different materials can be
ground by the mill with dry or wet method.
The ball mill can use for dry and wet grinding and also can mix products of different
granularity and materials. Working mode: Two or four ball milling jars working at the same
time;
The maximum sample loading amount: Volume of ball milling jar 2/3,
Feeding granularity:soil material ≤ 10mm other material ≤ 3mm
Discharge granularity: the minimum can up to 0.1μm(i.e. 1.0 x10mm-4)
1. 360 degree whole direction planetary ball mill---Patented oil seal mute technology and gear drive core technology(Gear running in the oil tank ),noise reduced by 50%,increase service life more than 2 times. Homogeneity:For the same material and the same process, the results are required to be the same when two or four jars grinding. Repeatability:For the same material and the same process, the results are required to be the same when repeated grinding.
2. 360 degree whole direction planetary ball mill used dry mill, wet mill, vacuum mill, protective atmosphere mill, low temperature mill (need low temperature planetary ball mill, high temperature grinding
3. 360 degree whole direction planetary ball mill has the universal wheel to push while moving and has the supporting foots to stable while operation.
1) The gear drive instead of the belt drive which is easy to skid and the rotation speed not
stable.
2. It not only keeps the stability of gear drive, but also overcomes the shortcoming of the
original belt drive, such as the belt easy to slip and unstable speed.
3. Planetary movement principle is adopted in the ball mill jars.,which has high efficiency and fine
granularity.
4. Frequency conversion control, the ideal speed can be selected according to the test
results
5. The inverter has the protection of undervoltage and overcurrent, and has the memory
after the power off, so it can protect the motor.
6. It has a timing shutdown and an automatic timing function of positive and negative rotation.It
can freely select the operation mode as request with one - way , alternating , continuous,
timing and non - timing. and improves the grinding efficiency .
7. It can obtain four samples of different sizes and materials from one experiment at the
same time.
8. Low center of gravity, stable performance, compact structure, convenient operation, safe
and reliable, low noise, no pollution, low loss. The device is equipped with a safety switch, which can avoid the equipment running after
opening the safety cover, and avoid a safety accident;
9. When the planetary main disk are planetary working,it is operated by 360 degrees
rotation at the same time,which effectively avoids the deposition of the materials during
dry grinding.
10. The 360 degree rotation mode could adjust the rotational speed according to the
experiment demand,and can select between 1r/min to 14r/min.
Processing principle
Under the action of the geometry and special movement mode of the grinding carrier, the high frequency and high strength collision, shearing and friction generated by the grinding medium and the sample directly lead to the extremely excellent grinding effect of the sample, and the processing speed is fast. The size of the sample is small, uniform, consistent, etc.
Model | KMO-1L Omnidirectional 360 Rotary Planetary Ball Mill |
---|---|
Application field | Pharmaceuticals, food, geology, metallurgy, agriculture, glass, ceramics, aviation Chemical, biological, materials, lithium, electronics, plants, biology, etc. |
Application sample characteristics | Medium to low hardness, hard, brittle, fibrous, viscous |
Processing principle | Impact force, shear force, friction |
Processing type | Crushing, grinding, mixing, homogenization, alloying |
Maximum injection size (various materials) | <5mm soil <10mm |
Sample size | <75um-0.1um(100nm) |
Minimum throughput | 2L/can |
Maximum throughput | 4 X 2L |
Main disk speed | 10-320r/min |
Ball mill speed | 20-640r/min |
Total grinding speed | 960/min |
Grinding ball matching | Configuration one: crushing stage matching Configuration two: grinding stage matching Configuration three: nano dispersion |
Transmission ratio (planetary disk / ball mill tank) | 1:2 |
Ball mill carrier material | Stainless steel, agate, zirconia, corundum, tungsten carbide, nylon, polyurethane, PTFE, silicon carbide, etc. |
Ball mill media | Stainless steel, agate, zirconia, corundum, nylon, PTFE |
Media diameter | 1/2/3/5/8/10/15/20/25/30mm |
Number of carriers | 2 or 4 |
Size (length, width, height) | 108*95*108cm |
Protection level | IP60 |
Net weight | 380kg |
Grinding method | Dry grinding / wet grinding |
Voltage | 100-120V/200-240V AC ,50-60Hz,1.5KW (CE certification) |